Allen Bradley 1747-UIC - USB to DH485 - USB to 1747-PIC
100% compatible with Allen Bradley original 1747-UIC, AB SLC5/ 01/ 02/ 03/ 05 series PLC programming cable, use AB original driver, with indicator.
See below for a list of PLC' s that are compatible tested with Windows XP ( SP2 and SP3) note: that we have not yet tested it with Vista, Windows 7 ( 32bit version) should be fine when ran in ' XP mode "
The 1747-C13 cable is not needed as it is built as part of the cable.
You will also need RSLinx 2.53 or greater, RSLinx is free from Rockwell Automation ( Allen Bradley) Please note that this is not DH+ ( Data Highway Plus) this is DH485, please see below for a list of compatible processors:
SLC 5/ 00
1747-L20
1747-L30
1747-L40
Slc 5/ 01
1747-L511
1747-L512
1747-L513
1747-L514
SLC 5/ 02
1747-L521
1747-L522
1747-L523
1747-L524
SLC 5/ 03 For the 5/ 03 you can use the 1747-CP3 if the RS232 ( DB9) is not used, see here for our USB-1747-CP3 :
1474-L531
1747-L532
1747-L533
1747-L534
SLC 5/ 04
DH485 only ( not DH+ ) you can configure user Com1 on the 5/ 04' s for DH485.... but this is not standard on the 5/ 04' s
DH485 PanelViews
Please note that just like the orginal UIC made by Allen Bradley not all PanelViews are supported, but we do offer money back if you are not happy with your purchase.
If you have a over loaded 1746-P3 ( 24Vdc) power supply this ( and the orginal 1747-UIC) may trip the PS overload protection... if this happens you will need to turn off your power supply to let the internal overload to reset then turn back on, we have never had this happen with a 120/ 240 PS.
Facebook